wire schematic

General repair/maintenance/upgrade information exchange.

wire schematic

Postby nonameboy » Sun Jul 01, 2018 7:30 am

hi all, any one have the wire schematic for this https://imgur.com/a/6wo3ktB

its a 2565
need to check some conections cheers
nonameboy
 
Posts: 13
Joined: Wed Sep 13, 2017 4:40 am
Location: Uk

Re: wire schematic

Postby Chris_in_Texas » Sun Jul 01, 2018 11:58 am

Someone might have one but its unlikely. Regal considered the wiring diagrams as Intellectual Property and was only available to the dealers. You might send them an email and see if you can get a response. :?
Thanks, Chris

2012 - Regal 35 Sports Coupe - Twin VP 5.7GiCE-300-P - DP-SA - SOLD
2011 - Sea-Doo RXT260s - 1503HO Rotax 4TEC
2007 - Regal 3060 - Twin VP 5.0OSi - XDP - SOLD
2002 - Crownline 230BR VP 8.2GSiPEFS - DP-SM - SOLD
User avatar
Chris_in_Texas
2013 Regal Owners MULTIPLE Donator!
2013 Regal Owners MULTIPLE Donator!
 
Posts: 4395
Joined: Wed Mar 05, 2008 8:56 pm
Location: Frisco, TX (DFW Area)

Re: wire schematic

Postby nonameboy » Sun Jul 01, 2018 12:08 pm

Really, if let see if they help me out, thanks again Chris
nonameboy
 
Posts: 13
Joined: Wed Sep 13, 2017 4:40 am
Location: Uk

Re: wire schematic

Postby Chris_in_Texas » Sun Jul 01, 2018 3:50 pm

Yea long story I tried when I got my 3060 and they wouldn't do it because of IP. I laughed and just reversed engineered it all. Love where they use red wire for everything. :mrgreen: The worst is where the change colors in a hidden terminal strip somewhere so it goes in red and then comes out blue at the other end as an example. Ugh.
Thanks, Chris

2012 - Regal 35 Sports Coupe - Twin VP 5.7GiCE-300-P - DP-SA - SOLD
2011 - Sea-Doo RXT260s - 1503HO Rotax 4TEC
2007 - Regal 3060 - Twin VP 5.0OSi - XDP - SOLD
2002 - Crownline 230BR VP 8.2GSiPEFS - DP-SM - SOLD
User avatar
Chris_in_Texas
2013 Regal Owners MULTIPLE Donator!
2013 Regal Owners MULTIPLE Donator!
 
Posts: 4395
Joined: Wed Mar 05, 2008 8:56 pm
Location: Frisco, TX (DFW Area)

Re: wire schematic

Postby nonameboy » Sun Jul 01, 2018 4:56 pm

Lol,mine it's working, just when o wrap last week see some wires but I don't know they are coming from lol let's see if they give some help if not try to get a picture from the same model and year, thanks again for answer cheers mate
nonameboy
 
Posts: 13
Joined: Wed Sep 13, 2017 4:40 am
Location: Uk

Re: wire schematic

Postby Chris_in_Texas » Sun Jul 01, 2018 6:39 pm

Top left to right:
1) Bilge blower Fans (should be yellow)
2) Bilge pump (aft by transom)
3) Wiper motor (forward of windshield) (should be a small access panel in the ceiling)
4) Horn (up front in anchor locker

Lower Left to right:
1) Nav Lights (Anchor locker for forward and Arch or engine cover for aft light)
2) Windless (control wires to relay box (in anchor locker)
3) I assume cockpit lights (not sure but around cockpit)
Thanks, Chris

2012 - Regal 35 Sports Coupe - Twin VP 5.7GiCE-300-P - DP-SA - SOLD
2011 - Sea-Doo RXT260s - 1503HO Rotax 4TEC
2007 - Regal 3060 - Twin VP 5.0OSi - XDP - SOLD
2002 - Crownline 230BR VP 8.2GSiPEFS - DP-SM - SOLD
User avatar
Chris_in_Texas
2013 Regal Owners MULTIPLE Donator!
2013 Regal Owners MULTIPLE Donator!
 
Posts: 4395
Joined: Wed Mar 05, 2008 8:56 pm
Location: Frisco, TX (DFW Area)


Return to Repair Shop

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot], Majestic-12 [Bot] and 25 guests