Leisure cat prop cavition

New, and old Regal boat model information and questions.

Leisure cat prop cavition

Postby eshoremike » Tue Aug 29, 2017 7:30 pm

I have a 94 leisure cat with a 225 PRO XS with a 25" shaft and a REV 4 mercury prop. it seems to loose its bite when there is too much weight on the front of the boat or crossing another boats wake. I noticed the prop shaft is at the same depth as the bottom of the hull. I have a 6" jack plate on it and it is as low as it can go. I am thinking of putting a 5" extension shaft on the lower unit. if that puts it too deep I raise the motor up with the jack plate. any thoughts?
eshoremike
 
Posts: 1
Joined: Fri Aug 11, 2017 9:39 am

Re: Leisure cat prop cavition

Postby janie1952 » Thu Jan 25, 2018 1:49 pm

I have the same issue. Not seeing any replies. I'm not sure if there are any Leisure Cat owners around anymore. I wold like to get a group of current owners going. I have some information on these boats to share, but I am in need of information I cant seem to find. Owners Manual, Capacity Plate rating, etc. Any Leisure Cat owners out there?
janie1952
 
Posts: 3
Joined: Tue Feb 28, 2017 1:15 pm


Return to Boat Models

Who is online

Users browsing this forum: Google Adsense [Bot] and 14 guests