Page 1 of 1

regal 2565 seat

PostPosted: Fri May 11, 2018 5:06 am
by nonameboy
hi all can any one know if its possible to get this seat frame, mine just broken,
https://imgur.com/a/NlQWbaP

thanks

Re: regal 2565 seat

PostPosted: Fri May 11, 2018 5:38 am
by ImRich
It's probably made from "starboard". Go buy a piece and cut it to match the old part.

Alternatively, you can try to contact a regal dealer to see if they can get one for you.

Re: regal 2565 seat

PostPosted: Fri May 11, 2018 6:56 am
by nonameboy
Cheers its made of hard palstic, I think doing a 3d copy but let's see if any one knows if it's possible to get pne

Re: regal 2565 seat

PostPosted: Fri May 11, 2018 8:17 am
by ImRich
Yes, this stuff:

https://www.westmarine.com/west-marine- ... 35_001_009

It's not inexpensive. Look for a local supplier. The right size board and a jig saw or band saw and you've got a new part that will last.


Alternatively, you may be able to repair your original part by backing it with some aluminum on each side of the broken joint and using some flush screws and hidden nuts. This will work if the part is hidden inside of a cushion.

Re: regal 2565 seat

PostPosted: Fri May 11, 2018 9:57 am
by nonameboy
Yes inwas think doing that grab some plates and doing that,thanks for the help

Re: regal 2565 seat

PostPosted: Sat May 12, 2018 6:07 am
by ImRich
Here's an older post of a similar repair I did on my helm bolster pad that turned out great!

viewtopic.php?f=5&t=8199

Re: regal 2565 seat

PostPosted: Sat May 12, 2018 1:26 pm
by nonameboy
Great job thanks for that, cheers